spsinc%202011%202003039.jpg spsinc%202011%202003038.jpg spsinc%202011%202003037.jpg spsinc%202011%202003036.jpg spsinc%202011%202003035.jpg spsinc%202011%202003034.jpg
Products
A typical installation consists of:
Bolt on Head
Multi-stage Centrifugal Pump
Rotary gas Separator (Intake)
Protector
3 Phase Induction Motor
Flat-Cable Extension
3 KV Electric Power Cable
Switchboard
Transformer
Well Head

The pump, motor, protector and rotary gas separator are suspended on the production tubing by threading the tubing directly into the pump discharge head. The power cable is banded to the tubing with stainless steel or monel straps depending on the well  conditions.
spsinc%202011%202003032.jpg spsinc%202011%202003030.jpg
spsinc%202011%202003028.jpg spsinc%202011%202003026.jpg spsinc%202011%202003024.jpg spsinc%202011%202003022.jpg spsinc%202011%202003020.jpg spsinc%202011%202003018.jpg
spsinc%202011%202003016.jpg spsinc%202011%202003013.jpg spsinc%202011%202003012.jpg spsinc%202011%202003011.jpg spsinc%202011%202003010.jpg spsinc%202011%202003009.jpg spsinc%202011%202003008.jpg spsinc%202011%202003007.jpg spsinc%202011%202003006.jpg spsinc%202011%202003005.jpg spsinc%202011%202003003.jpg
Click Here for Electical Horizontal Disposal Surface Pumping Systems
spsinc%202011%202003001.jpg